Bluelab Soil pH Pen

Related products

• 

  PHOTOBIO Advanced Quantum PAR Meter

  PHOTOBIO Advanced Quantum PAR Meter   ACCURATE and COST EFFECTIVE: The Phantom PHOTOBIO Advanced Quantum PAR Meter provides measurement for any light source used in horticultural applications. MEASURES BROAD SPECTRUM: The Advanced Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. MAXIMIZE CROP YIELDS: There is a positive proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis. COMPACT and COMPLETE main unit, remote sensor, two connection cables (short-coiled & 12’ long-straight), AAA batteries and protective carrying case. RELIABILITY: Phantom’s track record of robust reliability and performance in horticultural equipment SIMPLE and EASY OPERATION: Easy operation, hand held, with recording of up to 99 readings COMPATABLE with modern sole-source and supplemental LED fixtures, high pressure sodium (HPS) DE grow lights, as well as any traditional indoor grow light source STORE UP TO 99 measurements for easy reference while adjusting light fixture height, dimmer setting and other environmental changes throughout each phase of growth.

  Read more
• 

  HM COM-80S TDS/EC METER

  The COM-80 is an economically priced, reliable EC/TDS meter that is ideal for testing applications such as hydroponics & gardening, pools & spas, aquariums & reef tanks, water ionizers, drinking water and more. Features: Measures electrical conductivity (EC), total dissolved solids (TDS).  Excellent for hydroponic nutrient testing. Four scales: EC: µS, mS;  TDS: ppm, ppt. Automatic Temperature Compensation (ATC). Water resistant. Measurement Range: 0-9990 µS; 0-5000 ppm; 0-9.9 mS; 0-5.0 ppt. Digital Calibration (push button) to any point within the meter’s range. Auto-off function, data-hold function and low-battery indicator. Display: large and easy-to-read LCD screen includes simultaneous temperature reading. Factory Calibrated: The COM-80 meter is calibrated with a 1413 µS solution—can be recalibrated with digital calibration using the push buttons. Includes a protective cap and batteries. Specifications: EC Range: 0-9990 µS; 0-9.9 mS. TDS Range: 0-5000 ppm (mg/L); 0-5.0 ppt. Temperature Range: 1-80°C/33-176°F. Resolution: 1 µS/ppm; 0.1 mS/ppt. Temp. resolution: 0.1°C/F. Accuracy: +/- 2%. EC-to-TDS Conversion Factor: NaCl (avg of 0.5). Calibration: Digital calibration by push button. Probe: Fixed. Housing: Water resistant. Power source: 3 x 1.5V button cell batteries (included)  (model LR44 or equivalent). Dimensions: 15.3 x 3.2 x 1.8 cm (6.0 x 1.3 x 0.7 inches). Weight: 53.9 g (1.9 oz).

  Read more
• 

  VBR-100 Quantum PAR Meter 6000umol

  VBR-100 Quantum PAR Meter 6000umol   Test PAR | PPFD for any light spectrum accurately. Can show the PAR of red and blue light in light seperately. Blue light is efficiently absorbed by plant chlorophyll. Red light is conducive to the growth of flowers and the maturation of fruits. Calculate DLI if the PPFD is stable. Record PPFD data at different points methodically by grids and get the PAR Uniformity(Uo). Optimized Growth, ensures even light for balanced plant growth and higher yield.I ncreased Efficiency, identifies weak spots to adjust light placement, reducing energy use. Prevents Light Issues, Avoids damage from too much light and growth issues from too little. The datas can be downloaded. Simple and safe APP for test PAR. Quick bluetooth connection. Easy to carry the PAR meter.The PAR Meter can be fixed on the drone or toy car to test PPFD anywhere in the greenhouse. No need for the tester to move around.

  Read more
• 

  YINMIK PH/TEMP METER

  YINMIK PH/TEMP METER   ✅[ 5 in 1 pH EC PPM TEMP Humidity Monitor for hydroponic plants] YINMIK 5-in-1 hydroponic nutrient monitor can give you consistent accurate pH, TDS, Electrical Conductivity , Temperature , Air Humidity testing. YK-6SP pH ppm Tester probe is new upgraded composite probe , one probe can measure all parameters of pH, TDS, EC and TEMP at the same time, fully meet the needs of hydroponics nutrients water monitoring. 🧡[Continuously Monitoring Nutrients Reservoir Tank ] The monitor probe can always be completely immersed in the nutrient solution tank, continuously monitoring the pH value, conductivity level and temperature in the nutrient solution tank, displaying the real-time pH EC TEMP value. You will get the growth environment conditions of your plants at once, making it easier to monitor your reservoir. 🌱[Professional design for home growers] YINMIK Hydroponic Monitor has Automatic Temperature Compensation function which can ensure that the measurement is always accurate no matter how the temperature fluctuates; The professional tester can automatically recognize 4.0 7.0 10.0 three kinds of calibration solutions, calibration is simple and easy ; can be mounted on a wall or hung on a support bar, easy to view hydroponic solution status. 😀[Monitor Hydroponic nutrients status on Mobile Any Time ] The smart hydroponic water monitor with APP can be connected to WIFI , easy connecting to your cell phone, monitoring hydroponic water solution through app even if you are not next to the hydroponic device.Besides, growers can view and download the measurement records for easy statistical analysis; set the high and low alarm values of pH EC PPM then receive warning messages when nutrient solution is out of the set range. 👍[Perfect for all kinds of hydroponic cultivation] Convenient for indoor growing system, hydroponic setup, indoor gardening, aeroponic, horticulture, DWC, Drip System ,Wick System , Ebb and Flow , Kratky Method of Hydroponics.

  Read more